Active wildfires in New Mexico.
Official NIFC incident records for New Mexico, refreshed hourly. 4 of 6 are not yet fully contained.
Fires burning in New Mexico.
Each circle is one incident, sized by reported acreage and coloured by containment — deep red for uncontained through to grey for fully contained.
Largest active fires in New Mexico.
Recorded November 9, 2026 from the NIFC incident feed. Containment is the share of a fire's perimeter with a control line around it — not how much of it has been put out.
| Fire | Size | Contained | Burning | Cause |
|---|---|---|---|---|
| BRANTLEY 2 | 712 acres | 100% | 162 days | Human |
| McCauley Springs | 712 acres | 100% | 137 days | Undetermined |
| 89 Ford | <1 acre | — | 234 days | Undetermined |
| Olympia | <1 acre | — | 126 days | Undetermined |
| Cold Wind | <1 acre | — | 226 days | Undetermined |
| Sena | <1 acre | — | 172 days | Human |
What a fire season does to New Mexico water.
The reason a monitoring platform publishes a wildfire map at all.
Severe fire strips vegetation and can leave soil water-repellent, so rain a healthy watershed would have absorbed runs straight off the burn scar instead. That drives debris flows, channel scour, and pulses of ash and sediment into streams well downstream of anything that burned — raising turbidity, depressing dissolved oxygen, and, with the riparian canopy gone, raising water temperature across reaches cold-water species depend on. The elevated risk usually persists for several years, until vegetation re-establishes.
This is a situational-awareness map built from federal data. Perimeters lag the real fire edge, and smoke output is a forecast. For evacuation orders and life-safety information in New Mexico, follow your local emergency management agency, county sheriff, and official incident channels.
See New Mexico on the live map.
This page is a still frame. The national map is interactive — pan, zoom, filter, and read every record behind what you see here.
Official NIFC fire perimeters and incident points under NOAA’s HRRR-Smoke near-surface forecast, filterable by size, state, and containment.
More on New Mexico.
Every Driftwise public map covers New Mexico. No login, no paywall.
Watershed Explorer
Every U.S. subbasin coloured by one federal dataset at a time — streamflow, flood forecast, drought, wildfire, satellite cyanobacteria screening, Clean Water Act impairment, land cover change and critical habitat — with national numbers, a region filter and a reading of every dataset for any subbasin, each labelled with its own source and date.
Streamflow Map — New Mexico
Every reporting USGS stream gauge in the country, coloured by how today’s flow ranks against that gauge’s own record for this calendar day.
U.S. Drought Map — New Mexico
The U.S. Drought Monitor — the country’s official weekly drought assessment — drawn across five severity categories from D0 to D4.
Flood Outlook Map — New Mexico
NOAA’s river forecast centres call the next few days at every forecast gauge in the country, on the National Weather Service’s own flood categories — action, minor, moderate and major.
Impaired Waters Map — New Mexico
Every subwatershed in the country against the states’ own Clean Water Act assessments — what is impaired, what is still on the 303(d) list, what is causing it, and how much of the country nobody has assessed at all.
Cyanobacteria Bloom Map — New Mexico
NASA and EPA’s satellites read a pigment index over roughly 2,300 U.S. lakes large enough to resolve at 300 m. A pre-screening indicator, not a health assessment, and never a substitute for your state’s advisory.
Critical Habitat & Protected Waters Map — New Mexico
Every river and stream the federal government has designated as ESA critical habitat, the listed species each unit is designated for, and who manages the protected land around it.
Wildfires by state.
Every state, with what the current NIFC feed reports. 29 states have at least one active incident right now.
- Alabama4 fires
- Alaskanone active
- Arizonanone active
- Arkansas2 fires
- California49 fires
- Colorado5 fires
- Connecticutnone active
- Delawarenone active
- District of Columbianone active
- Florida3 fires
- Georgianone active
- Hawaiinone active
- Idaho4 fires
- Illinoisnone active
- Indiananone active
- Iowanone active
- Kansasnone active
- Kentucky3 fires
- Louisiana1 fire
- Mainenone active
- Marylandnone active
- Massachusettsnone active
- Michigan3 fires
- Minnesota2 fires
- Mississippi4 fires
- Missourinone active
- Montana3 fires
- Nebraskanone active
- Nevadanone active
- New Hampshire1 fire
- New Jersey1 fire
- New Mexico6 fires
- New York1 fire
- North Carolinanone active
- North Dakota1 fire
- Ohio1 fire
- Oklahoma3 fires
- Oregon22 fires
- Pennsylvanianone active
- Puerto Rico2 fires
- Rhode Islandnone active
- South Carolina1 fire
- South Dakotanone active
- Tennessee1 fire
- Texas3 fires
- Utah4 fires
- Vermontnone active
- Virginianone active
- Washington6 fires
- West Virginia1 fire
- Wisconsin7 fires
- Wyoming2 fires
One platform for two monitoring programs.
Coordinate a multi-partner invasive species response, or manage the waterway program for a state park or conservation nonprofit. Bring your own program to the demo and we'll run Driftwise on it, live.
Request a demoA free 30-minute working session with your data on screen.
Scope a pilot for your program.
Tell us about your program — a watershed, an infestation, a trail system. We'll walk through how a field record becomes the report your agency and funders sign off on.
A working call, not a pitch
We spend the time on your actual program — the data you have now and the report you owe.
Guided onboarding
We import your existing records and configure the setup alongside your team. Role-based in-product tours carry the rest of the crew after the call.
Start with one season
Run a single pilot first and expand when it earns the next watershed.
Send us your corridor, watershed, or program and we'll build the working demo around your records. We reply within one business day.
Click to reveal — we obscure the address to cut spam.